Huazhao Refrigeration Equipment Blog

In the era of rapid economic development in the 21st century, the industrial refrigeration industry has been recognized by more and more people. In recent years, more and more enterprises have used various types of industrial chiller, and chiller is in our life and production. The role is also increasingly important. However, many individuals or enterprises have very vague ideas about the structure type of the chiller when they choose and purchase the chiller. For example, people sometimes do not understand what is the difference between an air-cooled chiller and a water-cooled chiller? Today  Water Cooled Chiller Supplier  will work with you to understand the structure and differences of chiller. In fact, industrial chiller can be divided into air-cooled type and water-cooled type according to its cooling type (condenser type). The air-cooled or water-cooled here refers to the method of discharging heat generated by the chiller during the refrigeration process; however, whether i

Water-cooled chiller is a device installed in the open air, which is more susceptible to the influence of outdoor environment. Today, the supplier of  China Industrial Water Chiller  will introduce some common faults of water-cooled chiller and their treatment methods. Water Cooled Chiller Machine Water Cooled Chiller Machine  group's common faults and their causes and processing methods are as follows: (1) Compressor starts and stops more frequently: it may cause too much or too little refrigerant to cause the pressure protection switch to operate, the exhaust pressure is too high or the suction pressure is too low, and the water system is not circulating well, and the evaporator surface is frosted . Treatment method: When it is determined that there is too much refrigerant, excess refrigerant can be released at the exhaust port. If it is insufficient, check for fluorine leakage and make up the refrigerant. Check the water circulation system for blockage or air,

Air-cooled refrigeration units are suitable for small and medium-sized systems with tight water sources in the area. It is more advantageous to use air-cooled refrigeration units for refrigeration systems with longer operating hours. If the system is managed properly and the water supply is controlled below 3%, it is difficult to recover the initial investment of the air-cooled refrigeration unit compared with the water-cooled refrigeration unit. The following suppliers of  China Industrial Water Chiller  make a comprehensive analysis and comparison of air-cooled / water-cooled refrigeration units, and hope to be useful to everyone. 1. Water-cooled chiller units must be equipped with cooling towers. For open cooling circulating water systems, after the cooling water absorbs heat, it comes into contact with air, carbon dioxide enters the air, and dissolved oxygen and turbidity in the water increase, resulting in four major cooling circulating water systems. Problems: corrosion, sca

Refrigerators are increasingly used in various industries around us. Their main role is to provide industrial cooling water for equipment or products, and use  Water Cooled Chiller Machine  to reduce temperature, which not only improves production efficiency. It also reduces production costs. The good performance of water-cooled chiller is mainly reflected in the following aspects: 1. High efficiency and energy saving: It is very reasonable in energy consumption during operation. When the unit is in use, the overall energy efficiency ratio is high, the energy adjustment is flexible, and it can be changed according to the actual needs of users. It can save energy. 2. Convenient operation: Assemble and assemble according to the size of the load, the unit's appearance design is simple, and multiple modules are combined to run. When some modules are under maintenance, the entire refrigeration unit system can still be operated, and maintenance and maintenance can be realized with