2017 summer chiller maintenance knowledge

The arrival of the hot summer days has affected the refrigeration performance of the refrigeration unit to some extent. In order to ensure the normal operation of the chiller in the summer, the air-cooled chiller should be communicated with customers and friends when it is used in the summer when the ambient temperature is relatively bad.

Specific precautions and maintenance methods are as follows:
1. In order not to affect the cooling effect of the chiller, to ensure the normal operation of the laser equipment. Please put the chiller in a clean, ventilated place with good heat dissipation (it is recommended to put it outdoors and cover the sunshade roof. There is no large heat source in the space within 2M of the equipment).

2. please clean the condenser regularly, it is best to use a gas of not less than 0.8Mpa (usually with nitrogen) or a soft brush to clean the dust on the heat sink of the condenser (floating with the fins to prevent the fins from blowing) Pour) to avoid high-temperature protection of the chiller caused by poor heat dissipation of the condenser during long-term operation of the equipment, and the compressor does not start and affects the customer's use.

3. Please remind customers to clean the water tank regularly and change the water frequently. Usually replace the pure water once a month, and at the same time clean the water tank (wash and rinse with detergent) to ensure the water quality of the chiller is clean.

4. In order to avoid the abnormal flow rate of the chiller, please remind the customer to change the water filter core frequently. When the white filter core is observed to be pig liver color, it should be replaced immediately. Otherwise, the chiller will be cut off, under flow and flow alarm. It even caused the filter cup to burst. (Note: Our company's 3HP and above equipment filtration device is built-in. When replacing the filter core, you need to open the left door of the device.)

5. pay attention to the monthly maintenance of the chiller, thoroughly clean the internal pipeline of the equipment once a month, carefully check whether there is oil trace in the refrigeration pipeline, if there is oil trace and the refrigeration effect of the equipment is not good, please check the professional maintain.

Jiangsu Huazhao Refrigeration Equipment Co., Ltd.
Selling Centre
Address: 305 Yuanlian Building, No. 1018 Jiayuan Road, Xiangcheng District, Suzhou, Jiangsu, China
Tel: 0512-65864668
Fax: 0512-65864778

评论

发表评论

此博客中的热门博文

Commercial Chiller Repair and Maintenance Tips

图片
Commercial chiller  repair can be an expensive and time-consuming process if you don't know what you're doing. However, with this guide, you will learn how to properly diagnose and repair your industrial chiller to get it working at full capacity again.   Commercial Chiller Repair and Maintenance Tips Commercial chiller repair is an important part of any chiller owner's job. There are many reasons why industrial chillers fail, but they can be prevented with a few simple steps.   Perform routine maintenance on a quarterly basis. Your  chiller manufacturer  should provide you with a chiller checklist as a guide. If optional, you should join your customer's preventive maintenance program. Always use a licensed HVAC company for maintenance and repairs, and keep maintenance and repair records for future reference.   Inspect the heat transfer fluid to ensure it is free of debris and properly rated for ambient conditions and process fluid temperature. Then, check the "Y&q
阅读全文

What Do You Know about Air Cooled Chiller?

图片
  The   chiller refrigeration system   consists of four basic parts, namely compressor, condenser, throttle and evaporator. The four major parts are connected by copper pipes in a certain order to form a closed system, and the system is charged with a certain amount of refrigerant. The role of industrial chillers is mainly to provide chilled water to various industries to cool down the equipment, to improve the accuracy of the product, improve the role of production efficiency. After the user has purchased and installed the industrial chiller, it is time to observe its actual operation. So what are the operating parameters of the industrial chiller? Its operating parameters are mainly voltage, current, power, temperature, pressure, flow rate, liquid level, concentration, etc. Voltage: The supply voltage must be in line with the equipment voltage, too high or too low will affect the safe operation of the chiller. Current: There are industrial chillers nameplate current and the actual op
阅读全文

Difference Between Water Cooled And Air Cooled Chiller System

图片
Many regions of the world are grappling with water scarcity. Numerous efforts in desalination and water trading attest to the magnitude of the problem. The World Bank estimates the number of people suffering from absolute water scarcity at 2 billion, a figure that could reach the 4.6 billion mark within the next 65 years. The water-energy nexus has been a recurring topic in recent years. The power plants that supply most countries with electricity consume large amounts of water, directly or indirectly. The debate on water consumption or not is very important in the feasibility studies for cooling plants. Based on the results of this study, the choice will be between water-cooled or air-cooled chillers . What is a chiller plant? This plant uses a refrigeration system to remove heat from the load and transfer it to the environment. This heat transfer unit is the chiller of choice for power plants and other large facilities. It is simply a system consisting of vinyl + water or a reservoir
阅读全文