Recirculating Chiller

Recirculating chiller is an air-cooled water circulation device that does not need the cold water tower, (the cold water tower is easy to mix impurities, dust caused by the cooling water circulation loop blockage, resulting in cooling capacity decline).
Recirculating chiller is a machine designed for the machine, scientific instrument, or production process that needs cooling water by compressor refrigeration. It has several advantages over the traditional pool cooling method.
image.png

Recirculating chiller advantage

  • 1. Save water
  • 2. It can improve the production capacity of required cooling equipment and instruments, extend the service life, and improve product quality.
  • 3. Anti-corrosion design can prevent the cooling water from blocking the pipeline for a long time.

Characteristics of recirculating chiller

  • 1, can make the poor impurity of the ring scene;
  • 2. It is most suitable for areas with poor water quality, and can save other accessories for cold water tower;
  • 3, adopt large capacity condenser, hot can easily run;
  • 4. It contains heat preservation water tank and water pump inside the fuselage, so there is no need to add cooling water tower to dissipate heat;
  • 5. Easy to install and move. But it has higher requirements for the working environment. First, because it is cooled by hot air circulation, if the ventilation effect of the installation workshop is not good, it will directly affect the cooling effect of the chiller. In addition, if you want to put the chiller in a dust-free workshop with humidity requirements, then I suggest you modify the water-cooled one. Because the wind coolers, will be in the top of the jet water vapor to dissipate heat;
image.png

Recirculating chiller fault resolution

Recirculating chiller is coolant (commonly used cooling fluid for water, commonly used in the low-temperature synthesis of cooling fluid, such as ethylene glycol aqueous solution, hereinafter referred to as the cooling fluid or referred to as the "water") as the heat transfer medium, will need cooling equipment or other heat transfer equipment, heat by refrigeration system to external equipment, to ensure that equipment work in the normal temperature range. The closed medium circulation is formed between the device and the equipment by the pressure of the water pump in the device. The temperature of the medium is detected by the temperature sensor to control the refrigerator.
When the cooling water circulating machine appears some malfunction, we often can solve the problem according to some specific phenomenon

Phenomenon 1: when the power switch indicator is not on, the water pump does not turn.

-- possible causes and solutions:
The air switch (circuit main brake) above the power access terminal is in the "OFF" state.
The problem can be solved by putting the air switch in the "ON" state.
image.png

Phenomenon 2: after the first boot or a long time not boot, the pump does not turn or blocked turn, "normal pump" indicator light on, alarm buzzer.

-- possible causes and solutions:
There is a lot of air or scale inside the pump, or the pump does not use for a long time to cause the rotor lubrication decline, which makes it difficult to start the pump. Need to unplug the power, open the device cover plate, open the motor rotor is behind the rubber disc, with a word screwdriver against the motor rotor around the activity, the motor can restart.
Note: Different types of pumps are used for different devices. The above methods of disassembly and adjustment may not be applicable.
Phenomenon: water level alarm indicator flashing, alarm buzzer.
-- possible causes and solutions:
  1. A) the water in the tank is short of water and the water level is too low. Fill with water over the level switch;
  2. B) the level switch is short-circuited or damaged. Replace the level switch.

Phenomenon 3: water flow alarm indicator flickers, buzzer alarm.

-- possible causes and solutions:
  • A) the water pump is not turned on. Press the button to open the water pump;
  • B) open flow loop. Check the loop;
  • C) water pump damage. Replace the pumps.
  • Therefore, we should cherish and care for our recirculating chiller. If you need to buy a recirculating chiller, please contact us.

评论

发表评论

此博客中的热门博文

Commercial Chiller Repair and Maintenance Tips

图片
Commercial chiller  repair can be an expensive and time-consuming process if you don't know what you're doing. However, with this guide, you will learn how to properly diagnose and repair your industrial chiller to get it working at full capacity again.   Commercial Chiller Repair and Maintenance Tips Commercial chiller repair is an important part of any chiller owner's job. There are many reasons why industrial chillers fail, but they can be prevented with a few simple steps.   Perform routine maintenance on a quarterly basis. Your  chiller manufacturer  should provide you with a chiller checklist as a guide. If optional, you should join your customer's preventive maintenance program. Always use a licensed HVAC company for maintenance and repairs, and keep maintenance and repair records for future reference.   Inspect the heat transfer fluid to ensure it is free of debris and properly rated for ambient conditions and process fluid temperature. Then, check the "Y&q
阅读全文

What Do You Know about Air Cooled Chiller?

图片
  The   chiller refrigeration system   consists of four basic parts, namely compressor, condenser, throttle and evaporator. The four major parts are connected by copper pipes in a certain order to form a closed system, and the system is charged with a certain amount of refrigerant. The role of industrial chillers is mainly to provide chilled water to various industries to cool down the equipment, to improve the accuracy of the product, improve the role of production efficiency. After the user has purchased and installed the industrial chiller, it is time to observe its actual operation. So what are the operating parameters of the industrial chiller? Its operating parameters are mainly voltage, current, power, temperature, pressure, flow rate, liquid level, concentration, etc. Voltage: The supply voltage must be in line with the equipment voltage, too high or too low will affect the safe operation of the chiller. Current: There are industrial chillers nameplate current and the actual op
阅读全文

Difference Between Water Cooled And Air Cooled Chiller System

图片
Many regions of the world are grappling with water scarcity. Numerous efforts in desalination and water trading attest to the magnitude of the problem. The World Bank estimates the number of people suffering from absolute water scarcity at 2 billion, a figure that could reach the 4.6 billion mark within the next 65 years. The water-energy nexus has been a recurring topic in recent years. The power plants that supply most countries with electricity consume large amounts of water, directly or indirectly. The debate on water consumption or not is very important in the feasibility studies for cooling plants. Based on the results of this study, the choice will be between water-cooled or air-cooled chillers . What is a chiller plant? This plant uses a refrigeration system to remove heat from the load and transfer it to the environment. This heat transfer unit is the chiller of choice for power plants and other large facilities. It is simply a system consisting of vinyl + water or a reservoir
阅读全文