Why Use Flooded Type Screw Type Chiller?

 

Screw chiller principle

Screw chillers are named screw chillers because the key component - the compressor is a screw type, the unit is made from the evaporator out of the state of the gas refrigerant; by the compressor after adiabatic compression, into a high temperature and high-pressure state. The compressed gas refrigerant, in the condenser, isobaric cooling condensation, after condensation changes into liquid refrigerant, and then through the throttle valve expansion to low pressure, into a gas-liquid mixture. The liquid refrigerant in low temperature and low pressure, in the evaporator, absorbs the heat of the cooled material and becomes gaseous refrigerant again. The gaseous refrigerant re-enters the compressor through the pipeline and starts a new cycle. These are the four processes of the refrigeration cycle, which is also the main working principle of the screw chiller.

Flooded Type Screw Type Chiller

Flooded Type Screw Type Chiller

The flooded type screw type chiller adopts efficient semi-closed screw compressor. the compressor adopts a 5:6 asymmetric high-efficiency screw rotor, which is graded or steplessly energy regulated. It is automatically adjusted according to load changes and is more energy-efficient. The unit heat exchanger adopts high-efficiency heat exchange tube to improve the refrigeration efficiency, and the unit is equipped with multiple protections to make the unit operate safely and reliably. Min. outlet temperature can be -60℃.

Features of chiller

1. The unit adopts a semi-closed screw compressor. The compressor adopts a 5:6 asymmetric high-efficiency screw rotor, which is graded or steplessly energy regulated. It is automatically adjusted according to load changes and is more energy-efficient.

2. The unit heat exchanger adopts high-efficiency heat exchange tube to improve the cooling efficiency. At the same time, in order to reduce the lubricating oil entering the heat exchanger, the unit increases the secondary oil content, minimizes the amount of oil entering the heat exchanger, and passes the specially designed ejector. The oil return device directs the lubricating oil in the heat exchanger back to the compressor to improve the refrigeration efficiency of the unit and also improve the reliability of the unit operation.

3. The unit is equipped with multiple protections to make the unit operate safely and reliably. The unit adopts direct cooling mode, which reduces the loss caused by the intermediate heat exchange and greatly reduces the running cost. 

4. Environmentally friendly 134a refrigerant is used to improve unit operating efficiency. The unit is equipped with multiple protections to make the unit safe and reliable.

If you want to get more information about flooded type screw type chiller price, please contact us.

评论

发表评论

此博客中的热门博文

Commercial Chiller Repair and Maintenance Tips

图片
Commercial chiller  repair can be an expensive and time-consuming process if you don't know what you're doing. However, with this guide, you will learn how to properly diagnose and repair your industrial chiller to get it working at full capacity again.   Commercial Chiller Repair and Maintenance Tips Commercial chiller repair is an important part of any chiller owner's job. There are many reasons why industrial chillers fail, but they can be prevented with a few simple steps.   Perform routine maintenance on a quarterly basis. Your  chiller manufacturer  should provide you with a chiller checklist as a guide. If optional, you should join your customer's preventive maintenance program. Always use a licensed HVAC company for maintenance and repairs, and keep maintenance and repair records for future reference.   Inspect the heat transfer fluid to ensure it is free of debris and properly rated for ambient conditions and process fluid temperature. Then, check the "Y&q
阅读全文

What Do You Know about Air Cooled Chiller?

图片
  The   chiller refrigeration system   consists of four basic parts, namely compressor, condenser, throttle and evaporator. The four major parts are connected by copper pipes in a certain order to form a closed system, and the system is charged with a certain amount of refrigerant. The role of industrial chillers is mainly to provide chilled water to various industries to cool down the equipment, to improve the accuracy of the product, improve the role of production efficiency. After the user has purchased and installed the industrial chiller, it is time to observe its actual operation. So what are the operating parameters of the industrial chiller? Its operating parameters are mainly voltage, current, power, temperature, pressure, flow rate, liquid level, concentration, etc. Voltage: The supply voltage must be in line with the equipment voltage, too high or too low will affect the safe operation of the chiller. Current: There are industrial chillers nameplate current and the actual op
阅读全文

Difference Between Water Cooled And Air Cooled Chiller System

图片
Many regions of the world are grappling with water scarcity. Numerous efforts in desalination and water trading attest to the magnitude of the problem. The World Bank estimates the number of people suffering from absolute water scarcity at 2 billion, a figure that could reach the 4.6 billion mark within the next 65 years. The water-energy nexus has been a recurring topic in recent years. The power plants that supply most countries with electricity consume large amounts of water, directly or indirectly. The debate on water consumption or not is very important in the feasibility studies for cooling plants. Based on the results of this study, the choice will be between water-cooled or air-cooled chillers . What is a chiller plant? This plant uses a refrigeration system to remove heat from the load and transfer it to the environment. This heat transfer unit is the chiller of choice for power plants and other large facilities. It is simply a system consisting of vinyl + water or a reservoir
阅读全文