How to Solve the High Pressure of the Chiller?

 High voltage alarm is one of the frequent faults of the chiller. There are many reasons, but the biggest reason is the reason for the cooling water system. The following is an analysis of the specific reasons and provides a simple solution.Get a free quotation.


If your water chiller is air-cooled, please refer to the following for troubleshooting: The air-cooled chiller condenser is used for cooling by the fan.


Air Cooled Screw Chiller


The causes of high-pressure failure are as follows


1. Abnormal operation of the condenser fan

This will lead to poor cooling of the condenser, that is, the heat generated within the refrigerant cycle cannot be removed by the fan, and then the temperature and pressure will rise. Just like when we blow the fan in hot weather, if the fan does not turn, we will continue to perspire, which is abnormal in heat and the high-pressure alarm will not occur.


Solution: Check and repair the fan, remove dust and debris around the fan hood, after stopping, clean with compressed air or water gun.


2. Condenser blockage

If the condenser is blocked, the high-pressure refrigerant gas in the refrigerant system will condense out of order, resulting in a lot of gas coalescing and high-pressure fault.


Solution: Clean and remove dirt from the condenser. Specific methods to consult manufacturers, guidance.


 Water Cooled Scroll Chiller

Water Cooled Scroll Chiller

3. Air in the system

This kind of reason mostly occurs in the new machine or compressor after maintenance, the refrigeration system mixed with air, resulting in the air can not condense, remain in the condenser, causing pressure rise.


Solution: through the chiller air separation valve, vent, or condenser, do not know how to operate, you can consult the cooler manufacturer.


4. Excess refrigerant

Excessive refrigerant is similar to the effect caused by entering the air. Too much refrigerant cannot be condensed into a liquid, occupying too much-condensing pipe area, reducing the condensing effect, and increasing the pressure.


Solution: Some refrigerants can be slowly released on the low-pressure side.


5. Open the expansion valve too small

The expandable valve is used to throttle the high-pressure liquid refrigerant into a gaseous state. If it is too small, the pressure of the condenser in front will be too high.


Solution: Properly increase the opening of the expansion valve.


The above is the disposal method of the high-pressure fault of the air-cooled chiller, If you want to get more information about good quality chiller, please do not hesitate to ask us.

评论

发表评论

此博客中的热门博文

Commercial Chiller Repair and Maintenance Tips

图片
Commercial chiller  repair can be an expensive and time-consuming process if you don't know what you're doing. However, with this guide, you will learn how to properly diagnose and repair your industrial chiller to get it working at full capacity again.   Commercial Chiller Repair and Maintenance Tips Commercial chiller repair is an important part of any chiller owner's job. There are many reasons why industrial chillers fail, but they can be prevented with a few simple steps.   Perform routine maintenance on a quarterly basis. Your  chiller manufacturer  should provide you with a chiller checklist as a guide. If optional, you should join your customer's preventive maintenance program. Always use a licensed HVAC company for maintenance and repairs, and keep maintenance and repair records for future reference.   Inspect the heat transfer fluid to ensure it is free of debris and properly rated for ambient conditions and process fluid temperature. Then, check the "Y&q
阅读全文

What Do You Know about Air Cooled Chiller?

图片
  The   chiller refrigeration system   consists of four basic parts, namely compressor, condenser, throttle and evaporator. The four major parts are connected by copper pipes in a certain order to form a closed system, and the system is charged with a certain amount of refrigerant. The role of industrial chillers is mainly to provide chilled water to various industries to cool down the equipment, to improve the accuracy of the product, improve the role of production efficiency. After the user has purchased and installed the industrial chiller, it is time to observe its actual operation. So what are the operating parameters of the industrial chiller? Its operating parameters are mainly voltage, current, power, temperature, pressure, flow rate, liquid level, concentration, etc. Voltage: The supply voltage must be in line with the equipment voltage, too high or too low will affect the safe operation of the chiller. Current: There are industrial chillers nameplate current and the actual op
阅读全文

Difference Between Water Cooled And Air Cooled Chiller System

图片
Many regions of the world are grappling with water scarcity. Numerous efforts in desalination and water trading attest to the magnitude of the problem. The World Bank estimates the number of people suffering from absolute water scarcity at 2 billion, a figure that could reach the 4.6 billion mark within the next 65 years. The water-energy nexus has been a recurring topic in recent years. The power plants that supply most countries with electricity consume large amounts of water, directly or indirectly. The debate on water consumption or not is very important in the feasibility studies for cooling plants. Based on the results of this study, the choice will be between water-cooled or air-cooled chillers . What is a chiller plant? This plant uses a refrigeration system to remove heat from the load and transfer it to the environment. This heat transfer unit is the chiller of choice for power plants and other large facilities. It is simply a system consisting of vinyl + water or a reservoir
阅读全文